Today we give a proceed how to use the pallet truck correctly:

1.First of all, we found a manual forklift with a professional pallet in the warehouse. as following is the picture:

2.The yellow one in the picture is the pallet. Before forking the goods, insert the forklift from the big side of the pallet. It should be noted that the distance between the forklift and the pallet should be 20cm.

3.There are three gears on the handle of manual forklift. Upward is the descending function, downward is the lifting function, and the center is the neutral position. After the forklift is inserted into the tray, the gear is shifted downward, and the forklift has lifting function.

4.Next, press the forklift handle up and down to raise the forklift to a suitable height, as shown in the figure below:

5.When the forklift is raised to the right position, shift the forklift to neutral position. At this time, the forklift handle has no lifting function. Pull the forklift handle with both hands and drag the goods to the designated position.

6.After the forklift is pushed to the designated position, keep the forklift gear up until the forklift is lowered to the bottom, then turn the forklift gear back to neutral, and pull the forklift out with both hands.

These 6 step is the operation method of forklift.